Physics, 08.12.2019 16:31 floihqrrigweo

When you are finished with the experiment, complete the following data analysis and submit your answers.
1. determine the volume of the box and the block
2. determine the ratio of the block to the box:
volume of block (l)(w)(h)
volume of box (l) w h
1. multiply this number by 100 to turn it into a percent.
2. complete this statement: the volume of the block is percent of the volume of the box.
3. determine the ratio of the number of hits to the number of shots
number of bits
100 shots
1. multiply this number by 100 to turn it into a percent.
2. complete this statement: the block was hit percent of the time
4 compare the results of step 2 to the results of step 3. are the percentages similar?
5. write a conclusion discussing the following items:
1. based on your findings do you think rutherford's hypothesis was reasonable?
2 restate rutherford's hypothesis and describe how you tested it.
3. state whether your results support the hypothesis. if they do not can you suggest some error in experimental
procedure (other than general human erron) that might explain it?
4. finally explain how this experiment confirms the nuclear model of the atom and the idea that most of the atom is

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 07:00

If a tank filled with water contains a block and the height of the water above point a within the block is 0.8 meter, what is the pressure at point a?

Answers: 2

Answer

Physics, 22.06.2019 13:30

6–48 bananas are to be cooled from 24 to 138c at a rate of 215 kg/h by a refrigeration system. the power input to the refrigerator is 1.4 kw. determine the rate of cooling, in kj/ min, and the cop of the refrigerator. the specific heat of banana above freezing is 3.35 kj/kg·8c.

Answers: 3

Answer

Physics, 22.06.2019 14:30

In order to do work, the force vector must be question 1 options: in a different direction than the acceleration vector. in a different direction than the displacement vector. in the same direction as the displacement vector and the motion. in the same direction as the acceleration vector.

Answers: 1

Answer

Physics, 22.06.2019 15:20

Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2

Answers: 2

Answer

You know the right answer?

When you are finished with the experiment, complete the following data analysis and submit your answ...

Questions