subject
Physics, 11.12.2019 03:31 elijahblaize24

Water is circulating through a closed system of pipes in a two-floor apartment. on the first floor, the water has a gauge pressure of 4.5 × 105 pa and a speed of 2.3 m/s. however, on the second floor, which is 4.0 m higher, the speed of the water is 4.4 m/s. the speeds are different because the pipe diameters are different. what is the gauge pressure of the water on the second floor?

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 01:00
4. who was the first one to measure the speed of light and conclude that it is finite? 5. who was the first philosopher who thought the speed of light is finite? 13. what is the speed of light numerically? 14. give an example of something moving faster than light 15. give an example for some particles or waves that
Answers: 1
question
Physics, 22.06.2019 03:40
Which types of electromagnetic waves have higher frequencies than the waves that make up ultraviolet light? check all that apply. radio waves infrared light microwaves gamma rays visible light x-rays
Answers: 2
question
Physics, 22.06.2019 08:00
Aheat engine running backward is called a refrigerator if its purpose is to extract heat from a cold reservoir. the same engine running backward is called a heat pump if its purpose is to exhaust warm air into the hot reservoir. heat pumps are widely used for home heating. you can think of a heat pump as a refrigerator that is cooling the already cold outdoors and, with its exhaust heat qh, warming the indoors. perhaps this seems a little silly, but consider the following. electricity can be directly used to heat a home by passing an electric current through a heating coil. this is a direct, 100% conversion of work to heat. that is, 19.0 \rm kw of electric power (generated by doing work at the rate 19.0 kj/s at the power plant) produces heat energy inside the home at a rate of 19.0 kj/s. suppose that the neighbor's home has a heat pump with a coefficient of performance of 4.00, a realistic value. note: with a refrigerator, "what you get" is heat removed. but with a heat pump, "what you get" is heat delivered. so the coefficient of performance of a heat pump is k=qh/win. an average price for electricity is about 40 mj per dollar. a furnace or heat pump will run typically 200 hours per month during the winter. what does one month's heating cost in the home with a 16.0 kw electric heater? what does one month's heating cost in the home of a neighbor who uses a heat pump to provide the same amount of heating?
Answers: 2
question
Physics, 22.06.2019 20:50
An ideal otto cycle has a compression ratio of 8. at the beginning of the compression process, air is at 95 kpa and 27°c, and 750 kj/kg of heat is transferred to air during the constant-volume heat-addition process. assuming constant specific heats at room temperature, determine (a) the pressure and temperature at the end of the heat-addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. (4390 kpa, 1730 k; 423 kj/kg; 56.4%; 534 kpa)
Answers: 1
You know the right answer?
Water is circulating through a closed system of pipes in a two-floor apartment. on the first floor,...
Questions
question
Mathematics, 26.07.2020 01:01
question
English, 26.07.2020 01:01
question
Computers and Technology, 26.07.2020 01:01
question
Computers and Technology, 26.07.2020 01:01
question
Biology, 26.07.2020 01:01
question
Mathematics, 26.07.2020 01:01
question
Geography, 26.07.2020 01:01
question
Mathematics, 26.07.2020 01:01
Questions on the website: 13722367