Water (cp = 4180 j/kg·k) is to be heated by solar-heated hot air (cp = 1010 j/kg·k) in a double-pipe counter-flow heat exchanger. air enters the heat exchanger at 90°c at a rate of 0.3 kg/s, while water enters at 22°c at a rate of 0.1 kg/s. the overall heat transfer coefficient based on the inner side of the tube is given as 80 w/m2·k. the length of the tube is 12 m and the internal diameter of the tube is 1.2 cm.

Achemistry student needs of 40ml diethylamine for an experiment. by consulting the crc handbook of chemistry and physics, the student discovers that the density of diethylamine is 0.7 . calculate the mass of diethylamine the student should weigh out. round your answer to significant digits.

Awater slide of length l has a vertical drop of h. abby's mass is m. an average friction force of magnitude f opposes her motion. she starts down the slide at initial speed vi. use work-energy ideas to develop an expression for her speed at the bottom of the slide. then evaluate your result using unit analysis and limiting case analysis. express your answer in terms of the variables h, m, l, vi, f and appropriate constants. vf v f

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.