Ajeep is stuck in the mud. the driver has a winch that can pull on its cable with a force of 35,000 n. the driver loops the cable through a pulley attached to a tree, then attaches the end of the cable to his jeep, as shown in figure 1. what is the magnitude of the maximum force that can be exerted on the jeep by this cable arrangement? express your answer with appropriate units.

the pulley system has a cable attached to either side of the front end of the jeep which connects to a pulley attached to a tree.

Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.