Events 1 and 2 are exploding firecrackers that each emit light pulses. in the reference frame of the detector, event 1 leaves a char mark at a distance 3.40 m from the detector, and event 2 leaves a similar mark at a distance 2.10 m from the detector. if the two events are simultaneous in the reference frame of the detector and occur at instant t=0, at what instant of time will each light pulse be detected?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Given the position vector of the particle r(t)=(t+1)i+(t^2−1)j+2t k, find the particle's velocity and acceleration vectors at t=1

The two most prominent wavelengths in the light emitted by a hydrogen discharge lamp are 656(red) and 486 (blue). light from a hydrogen lamp illuminates a diffraction grating with 500 lines per mm, and the light is observed on a screen 1.50 behind the grating. what is the distance between the first-order red and blue fringes?