subject
Physics, 31.12.2019 05:31 hannahsambrano12

What is the term that describes the ratio of desired signal to undesired signal in the average power level of a transmission

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 07:10
Search coils and credit cards. one practical way to measure magnetic field strength uses a small, closely wound coil called a search coil. the coil is initially held with its plane perpendicular to a magnetic field. the coil is then either quickly rotated a quarter-turn about a diameter or quickly pulled out of the field. (a) derive the equation relating the total charge q that flows through a search coil to the magnetic-field magnitude b. the search coil has n turns, each with area a, and the flux through the coil is decreased from its initial maximum value to zero in a time ∆t. the resistance of the coil is r, and the total charge is q = i∆t, where i is the average current induced by the change in flux. (b) in a credit card reader, the magnetic strip on the back of a credit card is rapidly “swiped” past a coil within the reader. explain, using the same ideas that underlie the operation of a search coil, how the reader can decode the information stored in the pattern of magnetization on the strip. (c) is it necessary that the credit card be “swiped” through the reader at exactly the right speed? why or why not?
Answers: 2
question
Physics, 22.06.2019 21:50
To fully describe the photoelectric effect, scientists must consider which of the following to be quantized? o a. both light and matter o b. matter only o c. light only o d. neither light nor matter
Answers: 2
question
Physics, 22.06.2019 23:00
Which of the following will cause an induced current in a coil of wire? the constant field of the earth passing through the coil a magnet resting near the coil a magnet being moved into or out of the coil a wire carrying a constant current near the coil
Answers: 3
question
Physics, 22.06.2019 23:40
To place a communications satellite into a geosynchronous orbit at an altitude of 22,240 mi above the surface of the earth, the satellite first is released from a space shuttle , which is in a circular orbit at an altitude of 185 mi, and then is propelled by an upper-stage booster to its final altitude. as the satellite passes through a, the booster's motor is fired to insert the satellite into an elliptic transfer orbit. the booster is again fired at b to insert the satellite into a geosynchronous orbit. knowing that the second firing increases the speed of the satellite by 4810ft/s, determine (a.) the speed of the satellite as it approaches b on the elliptic transfer orbit, (b.) the increase in speed resulting from the first firing at a.
Answers: 2
You know the right answer?
What is the term that describes the ratio of desired signal to undesired signal in the average power...
Questions
question
Mathematics, 08.07.2019 12:00
question
Mathematics, 08.07.2019 12:00
question
History, 08.07.2019 12:00
question
Mathematics, 08.07.2019 12:00
Questions on the website: 13722367