Physics, 03.01.2020 05:31 britneyvaughn219

Asingle-threaded power screw is 25 mm in diameter with a pitch of 5 mm. a vertical load on the screw reaches a maximum of 5 kn. the coefficients of friction are 0.06 for the collar and 0.09 for the threads. the frictional diameter of the collar is 45 mm. find the overall efficiency and the torque to ""raise"" and ""lower"" the load.

Answers: 2

Show answers

Another question on Physics

Physics, 22.06.2019 01:20

Abanked road comer of radius 146 m is to be constructed. if the comer is designed for vehicles moving with a speed of 20.0 m/s, what should the banking angle be, in units of degrees?

Answers: 3

Answer

Physics, 22.06.2019 02:30

Agas contained within a piston-cylinder assembly undergoes three processes in series: process 12: compression with pv= constant from 1 bar and 1 liter to 4 bar. process 23: constant pressure expansion to 1 liter. process 31: constant volume calculate the pressure and volume at each state, and sketch the processes on a p-vdiagram labeled with pressure and volume values at each numbered stat

Answers: 2

Answer

Physics, 22.06.2019 04:30

The image shows the positions of a car on a roller coaster track. arrange the cars in order based on their gravitational potential energy. begin with the lowest potential energy and end with the highest.

Answers: 1

Answer

Physics, 22.06.2019 06:20

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?

Answers: 1

Answer

You know the right answer?

Asingle-threaded power screw is 25 mm in diameter with a pitch of 5 mm. a vertical load on the screw...

Questions