Physics, 09.01.2020 22:31 minmaddiee

A. put a stick or pencil through the center of each gear. try putting them together, two at a time, by fitting the notches of one into the notches of the other. use the small one to turn the big one. use the big one to turn the medium one. use the medium one to turn the big one and then the small one.

b. download and print the chart below, fill it by using your gears. make a red mark on the rim of each of your gears. fit gear a into gear b at the point at which the two red marks touch. turn gear a one full turn; how many turns does gear b make? is it fewer than gear a or is it more than gear a? fill in the chart accordingly. for example, if for every turn that gear a makes, gear b turns 3 times, write “3” on the chart and fill in the ratio as 1: 3. (the ratio is however many times the second gear turns in respect to one turn of the first gear.)

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 23:30

Edward tolman explained the results of his study by theorizing that the rats were learning about the maze during every trial but they a. were agitated because other groups were getting reinforcement b. could not remember how to demonstrate it without reinforcement c. were not motivated to demonstrate it without reinforcement d. seemed to be too lazy to actually work without reinforcement

Answers: 3

Answer

Physics, 22.06.2019 00:30

What is the acceleration of a spaceship that is initially at rest and then speeds up to 220 m/s in 20 seconds

Answers: 1

Answer

Physics, 22.06.2019 23:40

Consider a u-tube whose arms are open to the atmosphere. now equal volumes of water and light oil (ρ = 49.3 lbm/ft3) are poured from different arms. a person blows from the oil side of the u-tube until the contact surface of the two fluids moves to the bottom of the u-tube, and therefore, the liquid levels in the two arms are the same. if the fluid height in each arm is 30 in, determine the gage pressure exerted by the person on the oil by blowing.

Answers: 3

Answer

Physics, 23.06.2019 00:30

What is the moment of inertia i of this assembly about the axis through which it is pivoted? express the moment of inertia in terms of mr

Answers: 2

Answer

You know the right answer?

A. put a stick or pencil through the center of each gear. try putting them together, two at a time,...

Questions