The resistance and the magnitude of the current depend on the path that the current takes. the drawing shows three situations in which the current takes different paths through a piece of material. each of the rectangular pieces is made from a material whose resistivity is rho = 1.50 x 10-2 ω*m, and the unit of length in the drawing is l0 = 7 cm. each piece of material is connected to a 3.00-v battery. find (a) the resistance and (b) the current in each case.

(a). Resistance = 0.4286ohms and Current (I) = 7A

(b). Resistance (R) = 0.027 ohms and Current (I) = 111.1A

(c). Resistance (R) = 0.1071 ohms and Current (I) = 28A

Explanation:

From the question, given that;

ρ = 1.5*10-2ῼ.m

Lo = 7cm = 0.07m

V = 3V

From the formula R = ρL/A, where A is the area of cross section, L is the length of material and ρ is the resistivity.

(A)

L = 4Lo and A = 2Lo*Lo

R = ρL/A

R = ρ4Lo/(2Lo*Lo)

R = 2ρ /Lo = 2*1.5*10-2/0.07

R = 0.4286 ῼ

From this the current becomes;

I = V/R = 3/ 0.4286 = 6.99 = 7A

(B)

L = Lo and A = 4Lo * 2Lo

R = ρL/A

R = ρLo/ (4Lo*2Lo) after eliminating Lo from both sides we get,

R = ρ/8Lo = 1.5*10-2 / 8*0.07

R = 0.027

Current (I) = V/R = 3/0.027 = 111.1A

(C)

L = 2Lo and A = Lo * 4Lo

R = ρL/A

R = ρ2Lo/ (Lo*4Lo) eliminating Lo from both sides we get,

R = ρ/2Lo = 1.5*10-2 / 2*0.07 = 0.1071

The current becomes;

I = V/R = 3/0.1071 = 28A

answer: i'm not sure which is which for i get confused on it all the time but i can tell you that the answer lies with the convex and concave devices. i hope this you. have a good day and best of luck to you!

explanation:

find the surface area of the sphere to the nearest square unit. use a calculator.

a. 254 in.2

b. 64 in.2

c. 127 in.2

d. 1,018 in.2