Physics, 16.01.2020 06:31 rebeccacruzz2017

Technician a says that distilled or clean drinking water should be added to a battery when the electrolyte level is low. technician b says that fresh electrolyte (solution of acid and water) should be added. which technician is correct?

Answers: 1

Show answers

Answers

Technician B is correct because the basic fundamental behind the storage of energy in the batteries is its electrolytic ions which create the potential difference we get on its terminals.

Explanation:

Technician B is correct because the basic fundamental behind the storage of energy in the batteries is its electrolytic ions which create the potential difference we get on its terminals.

As we know clean drinking water is poor in dissolved salts and ions which will not be able to hold the required electric potential in the electrolyte of the battery.Whereas a solution of acid and water is added to the battery as its electrolyte which has a good quantity of hydronium cations and the corresponding compound's anion serving as a medium to store the potential difference. This promotes the flow of electrons through a conductor.

Answer from: mariaherving55

Tech a is correct .

Explanation:

When the electrolyte level is low we put distilled water in battery to maintain the electrolyte level and not the fresh electrolyte( solution of water and acid) itself. The water present in the electrolyte is converted hydrogen and oxygen gases due to due to which the level of electrolyte decreases due to decrease in the level of oxygen in it.

Answer from: Quest

-4 on

Answer from: Quest

Answer: a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same sign as the -4.0 µc charge.======electricstatic force between two point charges is given by $f = \dfrac{kq_1q_2}{r^2}$ where k is coulomb's constant, 8.99×10⁹ n·m²/c², q₁ and q₂ are the point charges, and r is the distance between the two point charges.assign positive to q₁let q₁ = 6.0 µc, q₂ = -4.0 µc, q₀ represent the charge at the origin, and q₃ represent this new charge to place.the charge at the origin q₀ would experience the following force f₀₁ from q₁, with r = 6.0 m (note that 1 µc = 10⁻⁶ c) $f_{01} = \dfrac{kq_0q_1}{(\text{6.0 m})^2}$ the force from q₂ $f_{02} = \dfrac{kq_0q_2}{(\text{15 m})^2}$ the force from q₃ $f_{03} = \dfrac{kq_0q_1}{(\text{26 m})^2}$ the net force on the origin charge, q₀, has to be zero for no electrostatic forcehaving an equation where k and q₀ can be divided out of the equation will allow us to solve for q₃ $\begin{aligned} f_{net} & = 0\\ f_{01} + f_{02} + f_{03} & = 0 \\ \dfrac{kq_0q_1}{(\text{6.0 m})^2} + \dfrac{kq_0q_2}{(\text{15 m})^2} + \dfrac{kq_0q_3}{(\text{26 m})^2} & = 0 \\ kq_0 \left( \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2}\right) & = 0 \\ \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2} & = 0 \end{aligned}$ isolating: $\begin{aligned} \dfrac{q_3}{(\text{26 m})^2} & = -\dfrac{q_1}{(\text{6.0 m})^2} - \dfrac{q_2}{(\text{15 m})^2} \\ q_3 & = -(\text{26 m})^2\left(\dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2}\right) \\ q_3 & = -(\text{26 m})^2\left(\dfrac{6.0\times10^{-6} \text{ c}}{(\text{6.0 m})^2} + \dfrac{-4.0\times10^{-6} \text{ c}}{(\text{15 m})^2}\right) \\ q_3 & = -1.0064888 \times 10^{-4}\text{ c} \\ q_3 & = -1.0\times 10^{-4}\text{ c} \end{aligned}$ a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same as the -4.0 µc charge

Another question on Physics

Physics, 21.06.2019 20:00

Alice added sodium chloride to water and stirred the water for several minutes. alice is most likely trying to demonstrate that ionic compounds a. are hard. b. can dissolve. c. are clear. d. can melt.

Answers: 1

Answer

Physics, 21.06.2019 22:10

The car hoist allows the car to be driven onto the platform, after which the rear wheels are raised. if the loading from both rear wheels is 1380 lb, determine the force in the hydraulic cylinder ab. neglect the weight of the platform itself. member bcd is a right-angle bell crank pinned to the ramp at c. the force is positive if in tension, negative if in compression.

Answers: 2

Answer

Physics, 22.06.2019 05:30

A2-kg bowling ball is 2.5 meters off the ground on a post when it falls. just before it reaches the ground, it is traveling 7 m/s. assuming that there is no air resistance, which statement is true?

Answers: 3

Answer

Physics, 22.06.2019 19:20

Aproduction line at v. j. sugumaran's machine shop has three stations. the first station can process a unit in 7 minutes. the second station has two identical machines, each of which can process a unit in 16 minutes (each unit only needs to be processed on one of the two machines). the third station can process a unit in 10 minutes. ▼ is the bottleneck station, with a bottleneck time of nothing minutes per unit (enter your response as a whole number).

Answers: 3

Answer

You know the right answer?

Technician a says that distilled or clean drinking water should be added to a battery when the elect...

Questions