Physics, 16.01.2020 07:31 abbyg2710

Abowler throws a bowling ball of radius r = 11 cm along a lane. the ball slides on the lane with initial speed vcom,0 = 6.0 m/s and initial angular speed ω0 = 0. the coefficient of kinetic friction between the ball and the lane is 0.35. the kinetic frictional force f with arrowk acting on the ball causes a linear acceleration of the ball while producing a torque that causes an angular acceleration of the ball. when speed vcom has decreased enough and angular speed ω has increased enough, the ball stops sliding and then rolls smoothly.(a) what then isvinterms ofω? (b) during the sliding, what are the ball’s translational and angularacceleration? (c) how far does the ball slide?

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 09:40

(a) assume the equation x = at^3 + bt describes the motion of a particular object, with x having the dimension of length and t having the dimension of time. determine the dimensions of the constants a and b. (use the following as necessary: l and t, where l is the unit of length and t is the unit of time.) (b) determine the dimensions of the derivative dx/dt = 3at^2 + b. (use the following as necessary: l and t, where l is the unit of length and t is the unit of time.)

Answers: 1

Answer

Physics, 22.06.2019 16:50

Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1×105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =

Answers: 1

Answer

Physics, 22.06.2019 18:30

Energy can be transformed from one form to another. the diagram shows one such process. which energy transformation is represented in the diagram? nuclear to thermal and radiant nuclear to electrical and chemical chemical to nuclear and radiant chemical to electrical and nuclear

Answers: 1

Answer

Physics, 23.06.2019 02:10

The average atmospheric pressure on earth is approximated as a function of altitude by the relation patm = 101.325 (1 − 0.02256z)5.256, where patm is the atmospheric pressure in kpa, and z is the altitude in km with z = 0 at sea level. determine the approximate atmospheric pressures at atlanta (z = 306 m), denver (z = 1610 m), mexico city (z = 2309 m), and the top of mount everest (z = 8848 m).

Answers: 3

Answer

You know the right answer?

Abowler throws a bowling ball of radius r = 11 cm along a lane. the ball slides on the lane with ini...

Questions