The total power supplied to a lift motor is 5000w. in a test the motor transfers 12000 kj of energy in 20s to the gravitational potential energy store of the lift. calculate how much energy is supplied by the motor by the current through it in 20s

Which units can be used to measure length or distance? check all that apply. gram meter kilometer liter inch

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

The mantle is made up of which structural zones?