subject
Physics, 11.02.2020 20:27 JvGaming2001

Materials fracture when the force per unit area, called STRESS, exceeds a critical value. In general, the critical stress depends on the direction as well as the magnitude of the force. For example, bones break differently when subjected to torsional (twisting) stress than when subjected to compressional (or squeezing) stress. Let us consider compressional stress. Wet human bone for 20-39 year olds has an ultimate compressive strength of 1.6x104N/cm2 81. Consider a person who falls from a height to the ground. Upon landing, the person's kinetic energy is converted to work. If the person decelerates over a distance ? h, we can estimate the average force during the collision by Kinetic Energy :-ny' . Work : | F d: Fah If a person lands stiff-legged on a hard surface and doesn't bounce, the deceleration occurs over a very short distance, ? h ~ 1 cm. Since the force is transmitted up the leg, the stress is greatest where the cross-sectional area is least, ie, the tibia just above the ankle [8]. The following lists some different conditions that may occur during landing and physical explanations for why they make bone fracture from a fall more or less likely [8: (a) bounce [more likely. The impulse is twice as large for an elastic collision as for an inelastic collision.] (b) bent knees less likely. Bending the knees increases the time and distance over which deceleration occurs, which reduces the force] (c) landing in loose earth or sand less likely. This increases A h which reduces F (d) turning the body to land on the side less likely. This increases ? h. It also distributes the force widely over the body (increases A)?thereby reducing the stress] So, why can a properly executed karate kick break a concrete block without fracturing bones [16]? First, bone is a very strong material. Its ultimate compressive strength is approximately 40 times larger than concrete. Second, contact is made with the edge of the foot. This concentrates the force into a small area of the target and reduces the likelihood of bending a bone to the point of fracture. Third, the collision with the target is essentially inelastic and extends over several milliseconds, so the peak force, though large, does not exceed the strength of the bone, George B. Benedek and Felix M. H. Villars, PHYSICS WITH ILLUSTRATIVE EXAMPLES FROM MEDICINE AND BIOLOGY, Vol. 1. (Menlo Park: Addison-Wesley Publishing Co., 1974). [16 S R. Wilk, R. E. McNair, and M. S. Feld, AM. J. PHYS. 51, 783 (1983). If A (cross-sectional area of the tibia) 2.5 cm, compute how far a 71 kg person can fall and land stiff-legged on both legs without breaking a bone. Assume F is split evenly between two legs. (Hint: F 2? A ) cm

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 19:00
Find the momentum for a 2.6-kg brick parachuting straight downward at a constant speed of 8.4 m/s .
Answers: 3
question
Physics, 21.06.2019 19:30
Ben(55 kg) is standing on very slippery ice when junior(25kg) bumps into him. junior was moving at a speed of 8m/s before the collision and ben and junior embrace after the collision. find the speed of ben and junior as they move across the ice after the collision .
Answers: 2
question
Physics, 21.06.2019 22:10
The car hoist allows the car to be driven onto the platform, after which the rear wheels are raised. if the loading from both rear wheels is 1380 lb, determine the force in the hydraulic cylinder ab. neglect the weight of the platform itself. member bcd is a right-angle bell crank pinned to the ramp at c. the force is positive if in tension, negative if in compression.
Answers: 2
question
Physics, 22.06.2019 01:20
Your target variable is δf, the magnitude of the difference in frequency between the waves emitted from the sonar device and the waves received by the device after reflecting off the whale. write an expression for δf in terms of the relevant frequencies using the subscript notation introduced above.
Answers: 3
You know the right answer?
Materials fracture when the force per unit area, called STRESS, exceeds a critical value. In general...
Questions
question
English, 30.10.2020 20:00
question
Mathematics, 30.10.2020 20:00
question
Mathematics, 30.10.2020 20:00
question
Computers and Technology, 30.10.2020 20:00
Questions on the website: 13722363