Students were discussing a problem in which the class was asked to find the acceleration of a cart rolling up and down an incline at the instant the cart was at the very top of its path. Malia says, At the top the velocity has to be zero so the acceleration has to be zero too. Sasha disagrees saying, No, the velocity is changing at the top so the acceleration cant be zero. Who do you agree with? Discuss the reason for your answer and explain why the one who is wrong might legitimately be confused about which answer is correct.

The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

The combining of light nuclei is called blank. blank as in not actually blank. you know what im tryin to say.