An electric heater has a Nichrome heating element with a resistance of 9 Ω at 20oC. When 112 V are applied, the electric current heats the Nichrome wire to 1090oC. What is the operating wattage of this heater? (The temperature coefficient of resistivity of Nichrome is α = 0.0004 Co-1)

975.28 W.

Explanation:

Using,

R' = R(1+αΔt) Equation 1

Where R' = Resistance at the final temperature, R = Resistance at the initial temperature, α = temperature coefficient of resistivity of Nichorome, Δt = Temperature rise.

Given: R = 9 Ω, α = 0.0004/°C, Δt = 1090-20 = 1070 °C

Substitute into equation 1

R' = 9(1+0.0004×1070)

R' = 9(1.428)

R' = 12.862  Ω.

Note: Operating wattage of the heater means the operating power of the heater

The power of the heater is given as,

P = V²/R' Equation 2

Where P = Operating wattage of the heater, V = Voltage, R' = Operating resistance.

Given: V = 112 V, R' = 12.862 Ω

Substitute into equation 2

P = 112²/12.862

P = 975.28 W.

spare some change and give it to the poor

explanation:

plz : ((

as we probably am aware that our atmosphere or air have various levels, each level has different gasses, and each gas has another porousness. at the point when the light originates from lower porousness to higher penetrability, it alters its course. with the goal that implies that when the light originates from the moon to the earth, it alters it's course a lot more occasions. it essentially implies that the state of the light piece of the moon is changed on the earth.

not copied too! hope this !

joke:

h o h o hope you have a merry christmas!