You want to design an ideal Carnot heat engine that wastes only 35.0% of the heat that goes into it. The lowest cold-reservoir temperature available to you is +15.0°C. If 150.0 J of work is done per cycle, the heat input per cycle is closest to

The heat input per cycle is closest to 230.8 J

Explanation:

Given;

percentage of energy waste = 35%

The lowest cold-reservoir temperature = 15.0°C

useful work done in the reservoir per cycle = 150.0 J

To design an ideal Carnot heat engine that wastes only 35.0% of the heat that goes into it.

If 35% of heat input = wasted work, then

65 % of heat input  = useful work

∴ 0.65 ×  heat input = 150

heat input = 150/0.65

heat input = 230.8 J

Therefore, the heat input per cycle is closest to 230.8 J

freezing

deposition

condensation

explanation;

melting also called fusion is the process where solid becomes liquid, sublimation is the process where solid becomes gaseous without first changing to liquid, deposition involves change from gaseous to solid state, freezing involves change from liquid to solid, boiling or evaporation involves change of liquid to gaseous state, while condensation is the change from gaseous state to liquid state.

endothermic reactions involves absorption of heat from the surroundings or the environment while exothermic reactions involves loss of heat energy to the surroundings.

in this case, sublimation, evaporation and melting are endothermic reactions (gain energy from the environment) while, freezing, deposition and condensation are exothermic (loss of energy to the surroundings) reactions.

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation: