You are measuring the pressure with a sensor embedded in a bridge. The bandwidth of the sensor is only 30 Hz, which means it can only measure changes less than 30 times a second. However, there is a 60 Hz high power power line nearby that might affect the signal acquisition. To reduce the induced noise to minimum, which type of filter should be used?Design a filter that can filter out all the noises with a 10 kΩ resister.

Beryl states that insulation with the smallest possible thermal conductivity is best to keep a house warm in winter, but worst for keeping a house cool in summer. sapphire insists the reverse is true: low thermal conductivity is good in the summer, but bad in the winter. which one, if either is correct? a. beryl, because low thermal conductivity results in low heat transfer. b. beryl, because low thermal conductivity results in high heat transfer. d. sapphire, because low thermal conductivity results in high heat transfer. e. neither, because low heat transfer is desirable both in summer and in winter.