The current in a series circuit is 19.3 A. When an additional 7.40-Ω resistor is inserted in series, the current drops to 13.4 A. What is the resistance in the original circuit?

16.8ohms

Explanation:

According to ohm's law which states that the current passing through a metallic conductor at constant temperature is directly proportional to the potential difference across its ends.

Mathematically, V = IRt where;

V is the voltage across the circuit

I is the current

R is the effective resistance

For a series connected circuit, same current but different voltage flows through the resistors.

If the initial current in a circuit is 19.3A,

V = 19.3R... (1)

When additional resistance of 7.4-Ω is added and current drops to 13.4A, our voltage in the circuit becomes;

V = 13.4(7.4+R)... (2)

Note that the initial resistance is added to the additional resistance because they are connected in series.

Equating the two value of the voltages i.e equation 1 and 2 to get the resistance in the original circuit we will have;

19.3R = 13.4(7.4+R)

19.3R = 99.16+13.4R

19.3R-13.4R = 99.16

5.9R = 99.16

R= 99.16/5.9

R = 16.8ohms

The resistance in the original circuit will be 16.8ohms

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

b.

hope this : )