Physics, 26.02.2020 19:18 deeboss177

Oxidation of what molecules will produce the largest amount of energy?

Answers: 2

Show answers

Answers

Answer from: ChanceJ

The options in this question are shown in the image attached.

Explanation:

The molecules listed among the options include alkanoic acids and an alkane. The greatest amount of energy is produced by the compound having the highest carbon-carbon and carbon-hydrogen bonds. Oxidation of alkanes to carbon IV oxide and water produces tremendous amount of energy. This is typified when fossil fuels are burnt in excess oxygen.

Oxidation of what molecules will produce the largest amount of energy?

Answer from: Quest

air exerts forces on falling objects near earth’s surface.

explanation:

the term 'free falls' refer to object that are falling towards the earth, in a situation in which gravity is the only force acting on the object.

for an object in free fall, the acceleration is constant (g, the gravitational acceleration), and so the velocity of the object constantly increases.

for objects near earth's surface, there is always another force acting on the object: the resistance due to the air. this force is opposed to the direction of fall of the object, and it is proportional to the velocity of the object, so as the object falls down, this force increases up to a point when it balances the force of gravity, and the object continues its motion at constant velocity (called terminal velocity). since in this case gravity is not the only force acting on the object, we are not in a situation of free fall.

Answer from: Quest

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia

Another question on Physics

Physics, 22.06.2019 03:00

An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt,c and rt,h, and qin, as where rtot rt,c rt,h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc,n 0.05 k/w and rh,n 0.04 k/w, respectively. over time, dust accumulates on the refrigeratorâ€™s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh,d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th,i tc,i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc

Answers: 2

Answer

Physics, 22.06.2019 15:10

In the circuit, the switch s has been open for a long time and r = 125 kohm. it is then suddenly closed. (a) determine the time constant before the switch is closed. s (b) determine the time constant after the switch is closed. _ s (c) let the switch be closed at t = 0. find the current in the switch as a function of time. (use t for time. express your answer in milliamps and seconds.) i(t) =_

Answers: 3

Answer

Physics, 22.06.2019 19:50

The heater element of a 120 v toaster is a 5.4 m length of nichrome wire, whose diameter is 0.48 mm. the resistivity of nichrome at the operating temperature of the toaster is 1.3 × 10-6 ω·m. the toaster is operated at a voltage of 120 v. (a) what is the power drawn by the toaster? (b) if the cost of electricity is 12 ¢ per kilowatt-hour, and it takes 2 minutes to toast bread, how much does it cost for toasted bread? (c) when the heater element is at room temperature, is the resistivity in the nichrome wire greater than, less than, or equal to it’s resistivity when at operating temperature? explain.

Answers: 3

Answer

Physics, 22.06.2019 20:40

Ablock of mass m = 2.5 kg is attached to a spring with spring constant k = 740 n/m. it is initially at rest on an inclined plane that is at an angle of theta= 26 with respect to the horizontal, and the coefficient of kinetic friction between the block and the plane is uk = 0.17. in the initial position, where the spring is compressed by a distance of d = 0.16 m, the mass is at its lowest position and the spring is compressed the maximum amount. take the initial gravitational energy of the block as zero. the block's initial mechanical energy is 9.472 j.b. if the spring pushes the block up the incline, what distance l in meters will the block travel before coming to rest? the spring remains attached to both the block and the fixed wall throughout its motion.