Physics, 03.03.2020 02:37 JvGaming2001

Two 3.0 mm × 3.0 mm electrodes are held 0.10 mm apart and are attached to 8.5 V battery. Without disconnecting the battery, a 0.10-mm-thick sheet of Mylar is inserted between the electrodes. A) What is the capacitor's potential difference before the Mylar is inserted?
B) What is the capacitor's electric field before the Mylar is inserted?
C) What is the capacitor's charge before the Mylar is inserted?
D) What is the capacitor's potential difference after the Mylar is inserted?
E) What is the capacitor's electric field after the Mylar is inserted?
F) What is the capacitor's charge after the Mylar is inserted?

Answers: 2

Show answers

Another question on Physics

Physics, 22.06.2019 11:00

The government has declared that a hurricane is likely to hit the east coast. which government division is part of acf and provides guidance to citizens? a. job opportunities for low-income individuals b. office of human services emergency preparedness and response c. assets for independence d. low-income home energy assistance program

Answers: 1

Answer

Physics, 22.06.2019 12:50

Assume you measured the mass of the cart to be (500 ± 1) g and the mass of the additional mass you put on the cart to be (500 ± 1) g as well. since the scale you are using in the lab cannot measure objects heavier than 600g you will have to sum up individual pieces and propagate the error. so what would be the mass and the standard error of the cart and the mass

Answers: 3

Answer

Physics, 22.06.2019 15:30

Ineed ! using proper grammar, spelling, and punctuation, write at least one 5 sentence paragraph describing 3 ways we use the elements of the electromagnetic spectrum (ems) in our everyday lives.

Answers: 1

Answer

Physics, 22.06.2019 18:00

Air enters a gas turbine with two stages of compression and two stages of expansion at 100 kpa and 17°c. this system uses a regenerator as well as reheating and intercooling – the intercooler returns the air to the inlet temperature. the pressure ratio across each compressor is 4 ; 300 kj/kg of heat are added to the air in each combustion chamber; and the regenerator operates perfectly while increasing the temperature of the cold air by 20°c. determine the system’s thermal efficiency. assume isentropic operations for all compressor and the turbine stages and use constant specific heats at room temperature. (0.378)

Answers: 3

Answer

You know the right answer?

Two 3.0 mm × 3.0 mm electrodes are held 0.10 mm apart and are attached to 8.5 V battery. Without dis...

Questions