Using the right-hand rule from your lessons, determine the directions of the electrical current and magnetic field of the electromagnet. Create an illustration of these perpendicular forces and include it below. (You can take a picture of your illustration or use an online drawing program to make your illustration.)

An astronomer at the equator measures the doppler shift of sunlight at sunset. from this, she calculates that earth’s tangential velocity at the equator is 465 m/s. the centripetal acceleration at the equator is 3.41  10 2 m/s 2 . use this data to calculate earth’s radius.

Consider the growth of a 20-nm-diameter silicon nanowire onto a silicon wafer. the temperature of the wafer surface is maintained at 2400 k. assume the thermal conductivity of the silicon nanowire is 20 wm-1k-1 and all its surfaces including the tip are subjected to convection heat transfer with the coefficient h = 1×105 wm-2k-1 and t∞ = 8000 k. when the nanowire grows to l = 300 nm, what is the temperature of the nanowire tip (t (x =

Acommon technique in analysis of scientific data is normalization. the purpose of normalizing data is to eliminate irrelevant constants that can obscure the salient features of the data. the goal of this experiment is to test the hypothesis that the flux of light decreases as the square of the distance from the source. in this case, the absolute value of the voltage measured by the photometer is irrelevant; only the relative value conveys useful information. suppose that in part 2.2.2 of the experiment, students obtain a signal value of 162 mv at a distance of 4 cm and a value of 86 mv at a distance of 5.7 cm. normalize the students' data to the value obtained at 4 cm. (divide the signal value by 162.) then calculate the theoretically expected (normalized) value at 5.7 cm.