A 1045 hot-rolled steel tension test specimen has a diameter of 5.00 mm and a gage length of 30 mm. In a test to fracture, the stress and strain data below were obtained. Determine (a) the modulus of elasticity. (b) the proportional limit. (c) the ultimate strength. (d) the yield strength (0.05% offset). (e) the yield strength (0.20% offset). (f) the fracture stress. (g) the true fracture stress if the final diameter of the specimen at the location of the fracture was 3.74 mm.

An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt,c and rt,h, and qin, as where rtot rt,c rt,h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc,n 0.05 k/w and rh,n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh,d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th,i tc,i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc

The ozone hole appears in antarctica during

Question 1 (5 pts): what is the maximum distance for which you can you resolve the two individual headlights of an on-coming truck as two separate lights rather than one if the headlights are separated by 2.00 m and your eye has a diameter of 1.00 centimeter? assume a wavelength of 500 nm.