Physics, 06.03.2020 18:58 electronia

You are traveling in a car toward a hill at a speed of 36.4 mph. The car's horn emits sound waves of frequency 231 Hz, which move with a speed of 340 m/s. (a) Determine the frequency with which the waves strike the hill. (b) What is the frequency of the reflected sound waves you hear? (c) What is the beat frequency produced by the direct and the reflected sounds at your ears?

Answers: 1

Show answers

Answers

Answer from: orlandokojoasem1234

a. The frequency with which the waves strike the hill is 242.61 Hz

b. The frequency of the reflected sound wave is 254.23 Hz

c. The beat frequency produced by the direct and reflected sound is

11.62 Hz

Explanation:

Part A

The car is the source of our sound, and the frequency of the sound wave it emits is given as 231 Hz. The speed of sound given can be used to determine the other frequencies, as expressed below;

$f_{1} = f[\frac{v_{s} }{v_{s} -v} ]$ ..............................1

where $f_{1}$ is the frequency of the wave as it strikes the hill;

f is the frequency of the produced by the horn of the car = 231 Hz;

$v_{s}$ is the speed of sound = 340 m/s;

v is the speed of the car = 36.4 mph

Converting the speed of the car from mph to m/s we have ;

hint (1 mile = 1609 m, 1 hr = 3600 secs)

v = $36.4 mph *\frac{1609 m}{1 mile} *\frac{1 hr}{3600 secs}$

v = 16.27 m/s

Substituting into equation 1 we have

$f_{1}$ = $231 Hz (\frac{340 m/s}{340 m/s - 16.27 m/s})$

$f_{1}$ = 242.61 Hz.

Therefore, the frequency which the wave strikes the hill is 242.61 Hz.

Part B

At this point, the hill is the stationary point while the driver is the observer moving towards the hill that is stationary. The frequency of the sound waves reflecting the driver can be obtained using equation 2;

$f_{2} = f_{1} [\frac{v_{s}+v }{v_{s} } ]$

where $f_{2}$ is the frequency of the reflected sound;

$f_{1}$ is the frequency which the wave strikes the hill = 242.61 Hz;

$v_{s}$ is the speed of sound = 340 m/s;

v is the speed of the car = 16.27 m/s.

Substituting our values into equation 1 we have;

$f_{2} = 242.61 Hz [\frac{340 m/s+16.27 m/s }{340 m/s } ]$

$f_{2}$ = 254.23 Hz.

Therefore, the frequency of the reflected sound is 254.23 Hz.

Part C

The beat frequency is the change in frequency between the frequency of the direct sound and the reflected sound. This can be obtained as follows;

Δf = $f_{2}$ - $f_{1}$

The parameters as specified in Part A and B;

Δf = 254.23 Hz - 242.61 Hz

Δf = 11.62 Hz

Therefore the beat frequency produced by the direct and reflected sound is 11.62 Hz

Answer from: Quest

Ineed the problem dude

Answer from: Quest

one person pulls 90n one way and the other has 100n pulling the other way.

so the net force = 90 - 100 = -10n,

or the ans can be 10n if the picture shows -90n and 100n instead.

Another question on Physics

Physics, 22.06.2019 06:30

Suppose you have a box. which of these is not necessarily a true statement regarding the relationship between the force applied to the box, the work done on the box, and the distance the box is moved? a. if the box is not moved, no force is being applied to the box. b. if no force is applied to the box, no work is done on the box. c. if work is done on the box, then a force is applied to the box. d. if work is done on the box, then the box is moved a distance.

Answers: 2

Answer

Physics, 22.06.2019 07:40

Which best describes how fluids change as they travel through different portions of the convection currents? they change to solids at the outer portion of the convection currents. they change to solids at the inner portion of the convection currents. they become more dense at the outer portion of the convection currents. they become more dense at the inner portion of the convection currents

Answers: 2

Answer

Physics, 22.06.2019 19:30

Amass m = 74 kg slides on a frictionless track that has a drop, followed by a loop-the-loop with radius r = 18.4 m and finally a flat straight section at the same height as the center of the loop (18.4 m off the ground). since the mass would not make it around the loop if released from the height of the top of the loop (do you know why? ) it must be released above the top of the loop-the-loop height. (assume the mass never leaves the smooth track at any point on its path.) 1. what is the minimum speed the block must have at the top of the loop to make it around the loop-the-loop without leaving the track? 2. what height above the ground must the mass begin to make it around the loop-the-loop? 3. if the mass has just enough speed to make it around the loop without leaving the track, what will its speed be at the bottom of the loop? 4. if the mass has just enough speed to make it around the loop without leaving the track, what is its speed at the final flat level (18.4 m off the ground)? 5. now a spring with spring constant k = 15600 n/m is used on the final flat surface to stop the mass. how far does the spring compress?

Answers: 3

Answer

Physics, 22.06.2019 19:40

Two charged particles, q1 and q2, are located on the x-axis, with q1 at the origin and q2 initially at x1 = 12.2 mm. in this configuration, q1 exerts a repulsive force of 2.62 µn on q2. particle q2 is then moved to x2 = 18.0 mm. what is the force (magnitude and direction) that q2 exerts on q1 at this new location? (give the magnitude in µn.)

Answers: 1

Answer

You know the right answer?

You are traveling in a car toward a hill at a speed of 36.4 mph. The car's horn emits sound waves of...

Questions