A certain capacitor is charged to a potential difference V. If you wish to increase its stored energy by 77%, by what percentage should you increase V

33%

Explanation:

Energy stored in a capacitor (U) =

The capacitance is constant. Hence,

V2/V1 =

If U1 = 1, then U2 is an increase of 77% (0.77), hence U2 = 1.77

V2/V1 =

V2/V1 = 1.33

Hence, the v of the capacitor should be increased by 33% in order to increase its stored energy by 77%.

Explanation:

Below is an attachment containing the solution.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

the small 0.38-kg slider is known to move from position a to position b along the vertical-plane slot. determine (a) the work done on the body by its weight and (b) the work done on the body by the spring. the distance r = 0.70 m, the spring modulus k = 154 n/m, and the unstretched length of the spring is 0.53 m

explanation:

-reverse card