A crate of 45.2-kg tools rests on a horizontal floor. You exert a gradually increasing horizontal push on it and observe that the crate just begins to move when your force exceeds 310N . After that you must reduce your push to 231N to keep it moving at a steady 25.2cm/s .
Part A: What is the coefficient of static friction between the crate and the floor?
Part B: What is the coefficient of kinetic friction between the crate and the floor?
Part C: What push must you exert to give it an acceleration of 1.13m/s^2 ? (in N)Part D: Suppose you were performing the same experiment on this crate but were doing it on the moon instead, where the acceleration due to gravity is 1.62 m/s^2. What magnitude push would cause it to move? (in N)
Part E: What would its acceleration be if you maintained the push in part C?
Answers: 3
Physics, 22.06.2019 05:30
Aforklift raises a 1,020 n crate 3.50 m up to a shelf. how much work is done by the forklift on the crate? the forklift does j of work on the crate.
Answers: 2
Physics, 22.06.2019 19:30
Amass m = 74 kg slides on a frictionless track that has a drop, followed by a loop-the-loop with radius r = 18.4 m and finally a flat straight section at the same height as the center of the loop (18.4 m off the ground). since the mass would not make it around the loop if released from the height of the top of the loop (do you know why? ) it must be released above the top of the loop-the-loop height. (assume the mass never leaves the smooth track at any point on its path.) 1. what is the minimum speed the block must have at the top of the loop to make it around the loop-the-loop without leaving the track? 2. what height above the ground must the mass begin to make it around the loop-the-loop? 3. if the mass has just enough speed to make it around the loop without leaving the track, what will its speed be at the bottom of the loop? 4. if the mass has just enough speed to make it around the loop without leaving the track, what is its speed at the final flat level (18.4 m off the ground)? 5. now a spring with spring constant k = 15600 n/m is used on the final flat surface to stop the mass. how far does the spring compress?
Answers: 3
Physics, 23.06.2019 04:00
Robin is swinging back and forth from a trapeze. in which of the following situations is his kinetic energy being transformed into potential energy
Answers: 2
Physics, 23.06.2019 04:50
By examining a wave’s pattern after it interacts with a barrier or gap, measurements can be made to better understand certain wave phenomena. what is a broad question you can answer by doing this experiment?
Answers: 2
A crate of 45.2-kg tools rests on a horizontal floor. You exert a gradually increasing horizontal pu...
English, 29.10.2021 14:00
Social Studies, 29.10.2021 14:00
Mathematics, 29.10.2021 14:00
Computers and Technology, 29.10.2021 14:00
Business, 29.10.2021 14:00
Biology, 29.10.2021 14:00
SAT, 29.10.2021 14:00
Mathematics, 29.10.2021 14:00