One of the checks that you could do for problem 1) would be to check the output resistance of the Wheatstone bridge to make sure the bridge is not damaged. With no power connected to the bridge, you connect anOhmmeter to the outputpins. If each arm(branch)of the Wheatstone Bridge is 350Ω, what should the resistance read and why? (Draw the circuit and show your calculations.)

Explanation:

Let the four resistances of th wheat stone bridge is

P, Q, R and S and the value of each is 350 ohm.

Here, P and Q are in series.

R' = P + Q = 350 + 350 = 700 ohm

Then R and S are in series

R' = R + S = 350 + 350 = 700 ohm

Now R' and R'' are in parallel.

So, the equivalent resistance is

Req = R' x R'' / ( R' + R'')

Req = 700 / 2 = 350 ohm

Thus, the reading of ohmmeter is 350 ohm.

the answer is b

explanation:

adding a(n) to an electric circuit would increase the magnetic field around a wire;

b. solenoid

a solenoid is a type of electromagnet whose purpose is to generate a controlled magnetic field.

if the purpose of the solenoid is instead to impede changes in the electric current, a solenoid can be more specifically classified as an inductor rather than an electromagnet.