Physics, 23.03.2020 22:26 zoeyandblaze

Marvin uses a long copper wire with resistivity 1.68 x 10^-8 Ω⋅m and diameter 1.00 x 10^−3 m to create a solenoid that has a 3.00 cm radius.

Part A: Calculate the total resistance if Marvin uses 11.3 meters of wire to create the solenoid.

Part B: Calculate how many turns are in the solenoid.

Part C: A 3.00 Volt potential difference is applied across the wires of the solenoid. Calculate the current that passes through the solenoid.

Part D: If the coils in the solenoid are separated so that they are evenly spaced across a total length of 0.1 m, what is the magnitude of the magnetic field along the central axis inside of the solenoid?

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 17:10

Aspecial electronic sensor is embedded in the seat of a car that takes riders around a circular loop-the-loop ride at an amusement park. the sensor measures the magnitude of the normal force that the seat exerts on a rider. the loop-the-loop ride is in the vertical plane and its radius is 23 m. sitting on the seat before the ride starts, a rider is level and stationary, and the electronic sensor reads 740 n. at the top of the loop, the rider is upside down and moving, and the sensor reads 370 n. what is the speed of the rider at the top of the loop?

Answers: 1

Answer

Physics, 22.06.2019 08:00

Choose each of the settings that follow and list them below do it ill mark brainliest first object= position= speed= acceleration= second object= position= speed= acceleration=

Answers: 2

Answer

Physics, 22.06.2019 15:30

Two point charges are separated by a certain distance. how does the strength of the electric field produced by the first charge, at the position of the second charge, change if the second charge is doubled? a. the field does not change b. the field strength decreases by half. c. the field strength doubles d. the field strength quadruples

Answers: 1

Answer

Physics, 22.06.2019 15:50

The space between two 15-in.-long concentric cylinders is filled with glycerin (viscosity = 8.5 × 10-3 lb·s/ft2). the inner cylinder has a radius of 1 in. and the gap width between cylinders is 0.1 in. determine (a) the torque and (b) the power required to rotate the inner cylinder at 180 rev/min. the outer cylinder is fixed. assume the velocity distribution in the gap to be linear.

Answers: 2

Answer

You know the right answer?

Marvin uses a long copper wire with resistivity 1.68 x 10^-8 Ω⋅m and diameter 1.00 x 10^−3 m to crea...

Questions