And what type of heat transfer does wind play a role in earths atmosphere

Two red blood cells each have a mass of 9.0 multiply.gif 10-14 kg and carry a negative charge spread uniformly over their surfaces. the repulsion arising from the excess charge prevents the cells from clumping together. one cell carries −2.50 pc of charge and the other −3.10 pc, and each cell can be modeled as a sphere 7.5 μm in diameter. (a) what speed would they need when very far away from each other to get close enough to just touch? assume that there is no viscous drag from any of the surrounding liquid. answer is: 321 m/s how do i find this (b) what is the maximum acceleration of the cells in part (a)? answer is: 1.38e+10 m/s2 how did they find this answer

What is work? how much work is done to move an object 0 meters?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)