Physics, 24.03.2020 22:54 NateTheBeast12

A boat of mass 250 kg is coasting, with its engine in neutral, through the water at speed 1.00 m/s when it starts to rain with incredible intensity. The rain is falling vertically, and it accumulates in the boat at the rate of 100 kg/hr . What is the speed of the boat after time 0.500 hr has passed7 Assume that the water resistance is negligible. Express your answer in meters per second. Now assume that the boat is subject to a drag force Fd due to water resistance. Is the component of the total momentum of the system parallel to the direction of motion still conserved? The boat is subject to an external force, the drag force due to water resistance, and therefore its momentum is not conserved. The drag is proportional to the square of the speed of the boat, in the form Fd = bv2 where b = 0.5 N. s2/m2. What is the acceleration of the boat just after the rain starts'7 Take the positive x axis along the direction of motion. Express your answer in meters per second per second.

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 00:50

Acave rescue team lifts an injured spelunker directly upward and out of a sinkhole by means of a motor-driven cable. the lift is performed in three stages, each requiring a vertical distance of 10.0 m: (a) the initially stationary spelunker is accelerated to a speed of 4.90 m/s; (b) he is then lifted at the constant speed of 4.90 m/s; (c) finally he is decelerated to zero speed. how much work is done on the 68.0 kg rescue by the force lifting him during each stage?

Answers: 1

Answer

Physics, 22.06.2019 03:30

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.

Answers: 3

Answer

Physics, 23.06.2019 00:30

Define the terms moral development and moral reasoning

Answers: 3

Answer

Physics, 23.06.2019 02:30

Acircular ring of charge with radius b has total charge q uniformly distributed around it. what is the magnitude of the electric field at the center of the ring? 0 keq/b2 keq2/b2 keq2/b none of these answers

Answers: 3

Answer

You know the right answer?

A boat of mass 250 kg is coasting, with its engine in neutral, through the water at speed 1.00 m/s w...

Questions