Physics, 26.03.2020 22:14 cwsmith8026
You work for a company that specializes in electron beam-impact deposition. This apparatus uses a tightly focused electron beam to deposit atoms on a surface with very fine spatial resolution. You are given the job of calculating the maximum possible deflection of the electron beam when the random magnetic fields in the laboratory are reduced (by shielding) to a maximum value of 0.15 mGauss. The electrons are accelerated from rest through 20 kV and the path length is 3.6 cm. If the magnetic fields were later discovered to be twice as large, what modified path length would yield the same deflection as you originally calculated
Answers: 2
Physics, 21.06.2019 23:30
Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.
Answers: 1
Physics, 22.06.2019 13:40
Use the profile illustrated for problem (1). assume that the layer of silty sand fill (sm) is placed over the entire site. estimate the thickness of the fill (h - in feet) that will cause the effective vertical stress at the center of the clay layer to increase by 517.5 pounds per square foot.
Answers: 1
You work for a company that specializes in electron beam-impact deposition. This apparatus uses a ti...
Mathematics, 10.02.2021 20:10
Physics, 10.02.2021 20:10
Mathematics, 10.02.2021 20:10
Mathematics, 10.02.2021 20:10
Mathematics, 10.02.2021 20:10
Mathematics, 10.02.2021 20:10
History, 10.02.2021 20:10
History, 10.02.2021 20:10
Mathematics, 10.02.2021 20:10