Calculate the time required (in years) for water to penetrate a layer of clay that is 40 cm deep when exposed to a hydraulic gradient of 1 cm/cm. The permeability of clay is 1x10-8 cm/sec. If there is 30 cm static head of water on the clay layer, how long will it take for moisture to penetrate the 40 cm clay layer (in years)?

A110-pound person pulls herself up 4.0 feet. this took her 2.5 seconds. how much power was developed? 0.13 hp 0.32 hp 2.0 hp 3.1 hp

The air that we breath is made mostly of which gaseous molecule

Air enters a gas turbine with two stages of compression and two stages of expansion at 100 kpa and 17°c. this system uses a regenerator as well as reheating and intercooling – the intercooler returns the air to the inlet temperature. the pressure ratio across each compressor is 4 ; 300 kj/kg of heat are added to the air in each combustion chamber; and the regenerator operates perfectly while increasing the temperature of the cold air by 20°c. determine the system’s thermal efficiency. assume isentropic operations for all compressor and the turbine stages and use constant specific heats at room temperature. (0.378)