Awrench 30 cm long lies along the positive y-axis and grips bolt at the origin. a force is applied in the direction < 0,3,-4> at the end of the wrench. find the magnitude of the force needed to supply 100 n*m of torque to the bolt.

 = r x F 
| τ | = | r x F | = | r | | F | sinΘ 
100 = | (0.3)<0, 1, 0> x (F/5)<0, 3, -4> | 
5000/3 = | F | | <0, 1, 0> x <0, 3, -4> | 
5000/3 = | F | | <-4, 0, 0> | 
5000/3 = | F | * 4 
| F | = 1250/3 
| F | = 417 N 

Check: 
τ = r x F 
100<-1, 0, 0> = 0.3<0, 1, 0> x 250/3<0, 3, -4> 
100<-1, 0, 0> = 25 ( <0, 1, 0> x <0, 3, -4> ) 
100<-1, 0, 0> = 25 ( <-4, 0, 0> ) 
100<-1, 0, 0> = 100<-1, 0, 0> 

What the other people forgot was that you need the angle from the y-axis, which would be Θ = arctan(O/A) = arctan(z/y) = arctan(-4/3) = -53.1°. Then you take the sine of that to get 0.8. There is more work being done on the z-vector than there is on the y-vector, so the force is distributed (0.6) in the y-direction, and (0.8) in the z-direction (0.6² + 0.8² = 1). 

“foliation in geology refers to repetitive layering in metamorphic rocks. each layer can be as thin as a sheet of paper, or over a meter in thickness. the word comes from the latin folium, meaning "leaf", and refers to the sheet-like planar structure. “i found this on google i hope it you