A scientist who studies teenage behavior was interested in determining if teenagers spend more time playing computer games then they did in the 1990s. In 1990s, the average amount of time spent playing computer games was 10.2 hours per week. Is the amount of time greater than that for this year? Ten students were surveyed and asked how many hours they spent playing video games. The test statistics is equal to 0.45.What is the p-value?greater than 0.10between 0.010 and 0.025less than 0.001between 0.001 and 0.005between 0.005 and 0.010between 0.025 and 0.05between 0.05 and 0.10

greater than 0.10

Explanation:

The null hypothesis is:

The alternate hypotesis is:

Our test statistic is:

In which X is the statistic, is the mean, is the standard deviation and n is the size of the sample.

We have that:

We are testing if X is greater than 0.45, so our pvalue is 1 subtracted by the pvalue of z = t = 0.45.

z = 0.45 has a pvalue of 0.6736

1 - 0.6735 = 0.3264

So our pvalue is 0.3264, which is greater than 0.10.

So the correct answer is:

greater than 0.10

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

the answer would be 32*f