Sort the following characteristics of cut banks and point bars. Items (4 items) (Drag and drop into the appropriate area below)

1. erosion dominates
2. faster flow velocities
3. Categories Cut Bank
4. inner bank
5. Point Bar
6. outer bank

Sublimation- which change of state is shown in model

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current