Physics, 07.04.2020 21:27 ellie55991

A galvanic cell based on these half-reactions is set up under standard conditions where each solutions is 1.00 L and each electrode weighs exactly 100.0 g. How much will the Cd electrode weigh when the non-standard potential of the cell is 0.03305 V?

Answers: 2

Show answers

Answers

Answer from: robert7248

Complete Question

$Fe^{2+} + 2e^----- Fe \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ E^0_{red} = - 0.441 V$

$Cd^{2+} + 2e^- ----- Cd \ \ \ \ \ \ \ \ \ \ \ \ \ \ E^0_{red} = -0.403V$

A galvanic cell based on these half-reactions is set up under standard conditions where each solutions is 1.00 L and each electrode weighs exactly 100.0 g. How much will the Cd electrode weigh when the non-standard potential of the cell is 0.03305 V?

The mass is M= 117.37g

Explanation:

The overall reaction is as follows

$Cd^{2+} + Fe Fe^{2+} + Cd$

The reaction is this way because the potential of $Cd^{2+} \ reducing \ to \ Cd$ is higher than the potential of $Fe^{2+} \ reducing \ to \ Fe$ so the the Fe would be oxidized and $Cd^{2+}$ would be reduced

At equilibrium the rate constant of the reaction is

$Q = \frac{concentration \ of \ product }{concentration \ of reactant }$

$= \frac{[Fe^{2+}[Cd]]}{[Cd^{2+}][Fe]}$

The Voltage of the cell $E_{cell} = E_{Cd^{2+}/Cd } + E_{Fe^{2+} /Fe}$

Substituting the given values into the equation

$E_{cell} = -0.403 -(-0.441)$

= 0.038V

The voltage of the cell at any point can be calculated using the equation

$E = E_{cell} - \frac{0.059}{n_e} Q$

Where $n_e \ is \ the \ number\ of\ electron$

Substituting for Q

$E = E_{cell} - \frac{0.059}{n_e} \frac{[Fe^{2+}[Cd]]}{[Cd^{2+}][Fe]}$

When E = 0.03305 V

$E = E_{cell} - \frac{0.59}{n_e} \frac{Fe^{2+}}{Cd^{2+}}$

Since we are considering the Cd electrode the equation becomes

$E= E_{cell} - \frac{0.059}{n_e} [\frac{1}{Cd^{2+}} ]$

Substituting values and making [ $Cd^{2+}$ ] the subject

$[Cd^{2+}] =\frac{1}{e^{[\frac{0.03305- 0.038}{\frac{0.059 }{2} }] }}$

= 0.8455M

Given from the question that the volume is 1 Liter

The number of mole = concentration * volume

= 0.8455 * 1

= 0.8455 moles

At the standard state the concentration of $Cd^{2+}$ is =1 mole /L

Hence the amount deposited on the Cd electrode would be

= Original amount - The calculated amount

= 1 - 0.8455

= 0.1545 moles

The mass deposited is mathematically represented as

$mass = mole * molar \ mass$

The Molar mass of Cd = 112.41 g/mol

Mass = 0.1545 *112.41

= 17.37g

Hence the total mass of the electrode is = standard mass + calculated mass

M= 100+ 17.37

M= 117.37g

Answer from: Jasten

The mass of Cd is 121.92 g

Explanation:

The initial concentrations are:

$nFe=\frac{mass}{molecular weight} =\frac{100}{55.845} =1.7906\\nCd=\frac{100}{112.411} =0.88959$

Initially:

[Fe2+] = 1.7906[Cd2+] = 0.88959

After the reaction:

[Fe2+] = 1.7906 + x

[Cd2+] = 0.88959 - x

Eo = Ered - Eoxidation = (-0.403 - 0.441) = 0.038

The Nernst equation is:

$E=0.038-\frac{0.0592}{2} log\frac{[Fe^{2+}] }{[Cd^{2+}] } \\0.03305=0.038-0.0296log\frac{1.7906+x}{0.88959-x}$

Solving for x:

x = -0.195

[Fe2+] = 1.7906 -0.195 = 1.5956

[Cd2+] = 0.88959 + 0.066 = 1.08459

Mass of Cd2+ = 1.08459 * 112.411 = 121.92 g

Answer from: Quest

Iisisisisososos9soslslsskosisosisi

Answer from: Quest

Ithink the answer is d

Another question on Physics

Physics, 22.06.2019 01:10

The 10-kg double wheel with radius of gyration of 125mm about o is connected to the spring of stiffness k = 600 n/m by a cord which is wrapped securely around the inner hub. if the wheel is released from rest on the incline with the spring stretched 225 mm, calculate the maximum velocity v of its center o during the ensuing motion. the wheel rolls without slipping

Answers: 1

Answer

Physics, 22.06.2019 06:40

Determine the change in width a, height b, thickness t when a plate is subjected to the uniform distributed load and is made of material having modulus of elasticity e=230 gpa and poisson's ratio ν=1/3. given : a=400 mm and b= 300 mm also the uniformly distributed load in downward y direction of plate is 2 mn/m and in the positive x direction is 3 mn/m and t=20 mm

Answers: 1

Answer

Physics, 22.06.2019 10:00

One object has a mass of 1 kg and another object has a mass of 3 kg. if the speeds are the same, which of the following is true about their kinetic energy?

Answers: 2

Answer

Physics, 22.06.2019 17:40

The weights of bags filled by a machine are normally distributed with a standard deviation of 0.05 kilograms and a mean that can be set by the operator. at what level should the mean weight be set if it required that only 1% of the bags weigh less than 9.5 kilograms? round the answer to 2 decimal places.

Answers: 1

Answer

You know the right answer?

A galvanic cell based on these half-reactions is set up under standard conditions where each solutio...

Questions