First, we verified that magnet movement would induce a current. Each time the magnet moved near the wire loop.
whether it was moving forward or in reverse, a current registered. When the magnet was stationary, a current of
milliamps was generated.
Under normal magnet polarity, whenever the magnet was moving toward the loop, the induced current had a
v value, and a
v value if the magnet was moving in reverse. Under reversed polarity, we found
the results to be exactly
in current direction, while the current maximums were

5submission this assignment is worth 20 points total. you are required to submit the following by next lab: 1. (3 points) determine the equation for the output angular velocity ω2 = θ˙ 2 as a function of θ1, ω1 = θ˙ 1 and α. you must show all your work to receive credit. 2. (2 points) use the result of problem#1 to plot ω2 over 0 ≤ θ1 ≤ 360deg with ω1 = 360deg/sec. do this for α = {10,30}deg. show the results on the same plot and properly label the axes, title, legend. for this you can use matlab or ms excel. 3. (3 points) determine the equation for the output angular acceleration ω˙ 2 and create a plot similar to the one in problem#2. 4. (10 points) submit plots of the results (ω2 and ω˙ 2) obtained from creo/mechanism and compare them to results of problem#2 and problem#3. note that you should do these comparisons for the two cases with α = {10,30}deg. 5. (2 points) provide a brief explanation of the results. did they match? what are the implications as misalignment angle increases?

4. if you were an astronaut on the moon, what would you experience? what would you see from your perspective?

What is the major limitation to the light microscope?