You have a horizontal grindstone (a disk) that is 85 kg, has a 0.31 m radius, is turning at 88 rpm (in the positive direction), and you press a steel axe against the edge with a force of 21 N in the radial direction.

a) assuming the kinetic coefficient of friction between steel and stone is .2, calculate the angular acceleration of the grindstone in rad/s^2

b) how many turns will the stone make before coming to rest

State the right hand rule of the direction of magnetic field in a conductor carrying current

Two technicians are discussing a resistance measurement between the can-h and can-l wires. technician a says this measurement should be done with the ignition switch in the "run" position. technician b states that a measurement of 0 ohms indicates an open in the network. which technician is correct?

Ablock of mass m = 2.5 kg is attached to a spring with spring constant k = 790 n/m. it is initially at rest on an inclined plane that is at an angle of 28 degrees with respect to the horizontal, and the coefficient of kinetic friction between the block and the plane is k = 0.14. in the initial position, where the spring is compressed by a distance of a = 0.18 m, the mass is at its lowest position and the spring is compressed the maximum amount. take the initial gravitational energy of the block as zero. b) if the spring pushes the block up the incline, what distance, l, in meters will the block travel before coming to rest? the spring remains attached to both the block and the fixed wall throughout its motion.