A projectile is launched from ground level with speed u at an angle
of above the horizon...
Physics, 08.04.2020 07:19 stgitskaysie367
A projectile is launched from ground level with speed u at an angle
of above the horizontal.
Find in terms of u,
o
and g by proving:
I. the maximum height H attained by the projectile,
II. the distance from the starting point at which the
projectile strikes the ground; this is called the range R
of the projectile.
III. The total time of flight
Answers: 3
Physics, 21.06.2019 22:00
1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?
Answers: 2
Physics, 22.06.2019 09:30
An electric clothes dryer has a resistance of 8 ohms. it draws 30 a of current. what is the voltage, in volts, of the wall outlet that it is plugged into?
Answers: 2
Physics, 22.06.2019 17:50
If there's a small amount of friction between two surfaces, the result could be select all that applya. no movement b. heatc. a little bit of movementd. sliding around
Answers: 2
Physics, 22.06.2019 21:20
Abeverage can is made of 3004-h19 aluminum alloy (elastic modulus 69 gpa, tensile yield strength 285 mpa, density 2.72 g/cm^3). the dimensions on the can are approximated as a thin-walled cylinder with a height of 4.83 inches, diameter of 2.60 inches. empty the can has a mass of 14.2 g. determine: a. the wall thickness of the cylinder b. assuming a pinned-pinned condition what is the critical load? c. assuming a fixed-fixed condition what is the critical load?
Answers: 1
Mathematics, 20.08.2019 22:50
Mathematics, 20.08.2019 22:50
Physics, 20.08.2019 22:50
Mathematics, 20.08.2019 22:50
English, 20.08.2019 22:50
Mathematics, 20.08.2019 23:00
Geography, 20.08.2019 23:00