subject
Physics, 08.04.2020 21:06 skrska

An ideal spring is hung vertically from the ceiling. When a 2.0-kg mass hangs at rest from it, the spring extends 6.0 cm from its relaxed length. A downward external force is now applied to the mass to extend the spring an additional 10 cm. Find the work done by the spring force while the spring extension changes from 6.0 cm to 16 cm

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 15:40
How does the electric potential energy between two charged particles change if one particle is reduced by a factor of 3? a. increased by a factor of 3 b. it is decreased by a factor of 9 c. it is reduced by a factor of 3 d. it is increased by a factor of 9
Answers: 1
question
Physics, 22.06.2019 19:30
Amass m = 74 kg slides on a frictionless track that has a drop, followed by a loop-the-loop with radius r = 18.4 m and finally a flat straight section at the same height as the center of the loop (18.4 m off the ground). since the mass would not make it around the loop if released from the height of the top of the loop (do you know why? ) it must be released above the top of the loop-the-loop height. (assume the mass never leaves the smooth track at any point on its path.) 1. what is the minimum speed the block must have at the top of the loop to make it around the loop-the-loop without leaving the track? 2. what height above the ground must the mass begin to make it around the loop-the-loop? 3. if the mass has just enough speed to make it around the loop without leaving the track, what will its speed be at the bottom of the loop? 4. if the mass has just enough speed to make it around the loop without leaving the track, what is its speed at the final flat level (18.4 m off the ground)? 5. now a spring with spring constant k = 15600 n/m is used on the final flat surface to stop the mass. how far does the spring compress?
Answers: 3
question
Physics, 22.06.2019 22:50
The illuminance of a surface varies inversely with the square of its distance from the light source. if the illuminance of a surface is 120 lumens per square meter when its distance from a certain light source is 6 meters, by how many meters should the distance of the surface from the source be increased to reduce its illuminance to 30 lumens per square meter?
Answers: 3
question
Physics, 23.06.2019 00:50
Which of the following is not an appropriate unit for acceleration? (kg/12 mihr? m/min/sec cm/30c?
Answers: 2
You know the right answer?
An ideal spring is hung vertically from the ceiling. When a 2.0-kg mass hangs at rest from it, the s...
Questions
question
English, 21.10.2019 16:30
Questions on the website: 13722362