Imagine you are on a space mission and you are 6 AU's from the Sun and you use a light sensor to measure the brightness of the Sun. The amount of sunlight received per square centimeter would be different by what factor compared to the same measurement on Earth at AU?

a. times less
b. 36 limes less
c. 6 times less
d. 6 times more
e. 25 times more

half of a circle

explanation:

the arrow and the top of the circle is matching together. it is not a polygon because a polygon would always be the same shape. therefore, an half of a circle is called semicircle so you would find the radius of it.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

c)as speed changes, wavelength and frequency change.

everything changes!

e

explanation:

there is no change in the electric potential energy as it is in rest on both conditions.