Physics, 15.04.2020 03:59 brooke012002

Interactive Solution 11.35 presents one method for modeling this problem. Multiple-Concept Example 8 also presents an approach to problems of this kind. The hydraulic oil in a car lift has a density of 8.04 x 102 kg/m3. The weight of the input piston is negligible. The radii of the input piston and output plunger are 8.61 x 10-3 m and 0.141 m, respectively. What input force F is needed to support the 23000-N combined weight of a car and the output plunger, when (a) the bottom surfaces of the piston and plunger are at the same level, and (b) the bottom surface of the output plunger is 1.10 m above that of the input plunger?

Answers: 3

Show answers

Answers

Answer from: girlhooper4life11

a) Fi = 85.76 N

b) Fi = 87.8 N

Explanation:

Given:-

- Density of hydraulic oil, ρ = 804 kg/m^3

- The radius of input piston, ri = 0.00861 m

- The radius of output piston, ro = 0.141 m

Find:-

What input force F is needed to support the 23000-N combined weight of a car and the output plunger, when

(a) the bottom surfaces of the piston and plunger are at the same level

(b) the bottom surface of the output plunger is 1.10 m above that of the input plunger?

Solution:-

For part a.

- We see that both plungers are equal levels or there is no pressure due to elevation head. So we are only dealing with static pressure exerted by the hydraulic oil on both plungers to be equal. This part is an application of Pascal's Law:

Pi = Po

Fi / Ai = Fo / Ao

Fi = Ai / Ao * Fo

Fi = (ri/ro)^2 * Fo

Fi = ( 0.00861 / 0.141 )^2 * 23000

Fi = 85.76 N

For part b.

- We see that both plungers are at different levels so there is pressure due to elevation head. So we are only dealing with static pressure exerted by the hydraulic oil on both plungers plus the differential in heads. This part is an application of Bernoulli's Equation:

Pi = Po + ρ*g*h

Where, h = Elevation head = 1.10m

Fi = (ri/ro)^2 * Fo + ρ*g*h*π*ri^2

Fi = 85.76 + (804*9.81*1.1*3.142*0.00861^2)

Fi = 87.8 N

Answer from: Quest

ice to water 1 water to vapour 2 latent heat

Answer from: Quest

What are you trying to ask?

Another question on Physics

Physics, 22.06.2019 08:40

When temperature of a substance increases, of its particles increase resulting in more between particles. real world applications of thermal expansion absolute zero (-273 degrees c) is the lowest possible temperature on the kelvin scale. it is a measure of where a substance has no kinetic energy. heat is a process of the . energy flows spontaneously from a object to a until equilibrium is reached. heat is measured in heat is transferred throughis a method of heat transfer that occurs between particles of matter that are in direct contact with each other. are poor conductors that impede / reduce the rate of heat transfer. is a method of heat transfer that occurs in fluids (non-solids) by means of currents. real world application of convectiona method of heat transfer through electromagnetic waves. when energy moves from one object to another inside a closed system, no energy is or in the system in the transaction. systems will spontaneously move to a state of organized energy or high disorder over time called

Answers: 2

Answer

Physics, 22.06.2019 10:30

The freezing and boiling point of a substance changes as the air pressure around it changes. for example, at a lower air pressure (higher altitude) it is easier for water molecules to escape from liquid into the air. in a high altitude city such as denver, colorado compared to a sea-level city such as houston, texas, water

Answers: 2

Answer

Physics, 22.06.2019 16:00

Why does lightning travel from clouds to the ground?

Answers: 2

Answer

Physics, 22.06.2019 17:00

The chart shows the costs and shipping times for materials that a company needs to build a new product. which describes the best trade-off if the company needs to start building their product within the next two years? they should order the domestic materials because it is always best to choose the fastest shipping time. they should order the imported materials because it is always best to choose the lowest cost for materials. since the shipping time is longer, they should order the domestic materials because the additional cost is worth it to get the materials in time. even though the shipping time is longer, they should order the imported materials because they are less expensive and should arrive in plenty of time to build the product.

Answers: 1

Answer

You know the right answer?

Interactive Solution 11.35 presents one method for modeling this problem. Multiple-Concept Example 8...

Questions