Physics, 15.04.2020 03:33 mariana5493

A uniform magnetic field is applied perpendicular to the plane of a 60-turn circular coil with a radius of 6.0 cm and a resistance of 0.60 Ω. If the magnetic field increases uniformly from 0.20 T to 1.80 T in 0.20 s, what is the magnitude of the emf induced in the coil?

Answers: 2

Show answers

Answers

Answer from: damientran

The expression for the magnetic flux for a given area is given by,

ϕ=BAcosθ

The surface is perpendicular to the field then the angle is zero.

The expression for the magnetic flux is given by,

ϕ=BA

For calculating the change in magnetic flux, differentiate the above equation with respect to time.

The expression for the change in magnetic flux is given by,

$\frac{{d\phi }}{{dt}} = A\frac{{dB}}{{dt}}$ ..... (1)

Here, A is area and it is constant.

Area of the circular coil is given by πr²

The expression for the change in magnetic flux in terms of the radius of the circular coil is given by,

$\frac{{d\phi }}{{dt}} = \pi {r^2}\frac{{dB}}{{dt}}$ ....... (2)

Here, r is the radius of the coil.

The magnetic field increases uniformly from 0.20 T to 1.8 T in 0.20 s.

Substitute 6.0 cm for r (1.8T−0.20T) for dB and 0.20 s for dt in the equation (2).

$\begin{array}{c}\\\frac{{d\phi }}{{dt}} = \pi {\left( {6.0{\rm{ cm}}} \right)^2}\frac{{\left( {1.8{\rm{ T}} - 0.20{\rm{ T}}} \right)}}{{0.20{\rm{ s}}}}\\\\ = 0.011304\left( {\frac{{1.6{\rm{ T}}}}{{0.20{\rm{ s}}}}} \right)\\\\ = 0.090432{\rm{ T/s}}\\\end{array}$

Explanation:

Magnetic flux is directly proportional to the magnetic field and the area of the flux through it. The area remains the same as the magnetic flux is increased by increasing the magnetic field.

The expression for the EMF is given by,

ε=−Ndϕ /dt ...... (3)

The value of change in magnetic flux with respect to time is calculated in step 1. Thus, we are using the value of $\frac{{d\phi }}{{dt}}$ = 0.090432T/s in the above equation (3)

Substitute 0.090432T/s for dt /dϕ and 60 for N in the equation (3).

ε=−(60)(0.090432T/s)

=5.425 V

The magnitude of induced EMF in the coil is,

∣ε∣=5.425 V

The magnitude of the EMF induced in the coil is 5.425 V.

Explanation:

Lenz’s law is defined as

ε ∝ dt /dϕ

To remove the proportionality sign, a constant of proportionality is introduced.

ε=−N dt /dϕ

Here, N is the number of turns in the coil.

Answer from: Quest

a displacement distance is size of displ

Answer from: Quest

see the picture for the vector

the magnitude of the vector by pythagorean theorem

r = √( (-10)^2 + (3)^2 ) = √109

magnitude = √109 units

the direction angle between vector and x-axis is

tan^(-1)(3/10) = 16.699

so the direction is approximately 16.7 degrees north of west

Another question on Physics

Physics, 22.06.2019 03:00

If it takes a planet 2.8 x 10^8 s to orbit a star with a mass of 6.2 x 10^30 kg what is the average distance between the planet and the star

Answers: 3

Answer

Physics, 22.06.2019 05:00

Aperson walking 1 mile everyday for exercise, leaving her front porch at 9: 00 am and returning to her front porch at 9: 25 am. what is the total displacement of her daily walk? a) 1 mileb) 0c) 25 minutes d) none of the above

Answers: 1

Answer

Physics, 22.06.2019 05:40

Two polarizers are oriented at 40∘ to each other and plane-polarized light is incident on them. if only 16 percent of the light gets through both of them, what was the initial polarization direction of the incident light?

Answers: 2

Answer

Physics, 22.06.2019 05:50

There are two routes similar in terrain; however, one route has an incline of approximately 28 degrees, and you must decide on which route to take. what is the maximum road grade that your fully loaded ecv can climb?

Answers: 2

Answer

You know the right answer?

A uniform magnetic field is applied perpendicular to the plane of a 60-turn circular coil with a rad...

Questions