subject
Physics, 15.04.2020 20:03 cupcake3103670

Three light bulbs are connected to a 9V battery in a series circuit. If
each light bulb is identical, what is the voltage across each light bulb?
Select one

0.11 V

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 20:00
When using two-wire cable to feed a 240-v appliance that does not require a neutral wire, you should a. mark both ends of the white wire green. b. use the cable as is. c. use only the black wire. d. mark both ends and any exposed area of the white wire black.
Answers: 1
question
Physics, 21.06.2019 22:00
1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?
Answers: 2
question
Physics, 21.06.2019 23:20
Acharge of 8.4x10^-4 c moves at an angle of 35 degrees to a magnetic field that has a field strength of 6.7x10^-3 t. if the magnetic force is 3.5 x10 ^-2 n, how fast is the charge moving?
Answers: 1
question
Physics, 22.06.2019 00:30
Glass is transparent to visibile light under normal conditions; however, at extremely high intensities, glass will absorb most of the light incident upon it. this works through a process known as multiphoton absorption. in this process, several photons are absorbed at the same time. if very intense light whose photons carry 2ev of energy is shined onto a material with a band gap of 4ev, that light can be absorbed through two-photon absorption, because two photons have the right amount of energy to bridge the band gap. what is the minimum number of photons of 800-nm light that are needed to equal or exceed the band gap of fused silica glass
Answers: 1
You know the right answer?
Three light bulbs are connected to a 9V battery in a series circuit. If
each light bulb is ide...
Questions
question
Mathematics, 07.12.2021 19:00
question
Mathematics, 07.12.2021 19:00
question
Mathematics, 07.12.2021 19:00
question
English, 07.12.2021 19:00
question
English, 07.12.2021 19:00
question
Mathematics, 07.12.2021 19:00
Questions on the website: 13722367