An alpha particle (consisting of two protons and two neutrons) is moving in a circle at a constant speed, perpendicular to a uniform magnetic field applied by some current-carrying coils. The alpha particle makes one clockwise revolution every 81 nanoseconds.

If the speed is small compared to the speed of light, what is the numerical magnitude B of the magnetic field made by the coils? What is the direction of this magnetic field?

1.64 T direction of the magnetic field is into the page .

Explanation:

Solution  

The magnetic force F_B causes the a-particle to move in a circular motion where the a-particle gains a centrifugal force F_C So, the magnetic force and the centrifugal force are equal to each other.  

F_B = F_C                                                   (1)

The magnetic force is affected by the magnitude and the direction of the magnetic force, the direction of the magnetic field, the sign of the charge and the direction of the moving of the charge and it is given by  

F_B = qvB

The centrifugal force is related to the mass of the a-particle ma and the circular radius R by  

F_C = m_a*v^2/R

Now let us plug the expressions of F_C and F_B into equation (1) to get the magnetic field B  

F_B = F_C      

qvB =m_a*v^2/R                                         (solve for B)

B = m_a*v^2/qR                                           (2)

The term {v/R) equals the angular frequency which equals 2/T . From the next steps, we got this relationship  

v = x/T = 2R/T

v/R = 2/T

Where the distance x equals the circumference of the circle where the alpha particle moves. Hence, the magnetic field is given by

B = (m_a/q)*(v/R)

  = (m_a/q)*2/T                                           (3)

Where T is the time, mo, is the mass of the alpha particle and q is the charge of the alpha particle and equals 2e.  

Alpha particle consists of two protons and two neutrons, therefore, the total mass of the alpha particle is given by  

m_a = 2m_p+ 2m_n

       = 2 (1.672 x 10^-27 kg) +2 (1.675 x 10^-27 kg)

       = 6.7 x 10^-27 kg  

Now we can plug our values for m_a,q and T into equation (3) to get the magnetic field B  

B = m_a*2/q*T

   = 2(6.7*10^-27)/2(1.6*10^-19)(81*10^-9s)

   = 1.64 T

The right-hand rule determines the direction of the magnetic field B and the direction of the motion of the alpha particle. Where your thump is in the direction of the magnetic field, while your remaining fingers curl in the direction of the motion of the alpha particle (Clockwise). Let us apply this rule, we find that the direction of the magnetic field is into the page .  

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

no sign of dia of fuel cell