please help!!

question 2: The following model was used to show a molecule or methane, or CH4. describe the number and type of each component of the molecule.

question 3: methane (CH4) combines with oxygen gas (O2) and water (H2O). describe the number and type of atoms for a molecule of each substance.

While listening to operatic solos, musicians process the lyrics and the tunes in separate brain areas. this most clearly illustrates the functioning of different

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Clothes dryer uses about 7 amps of current from a 240 volt line. how much power does it use?