Suppose in the previous example (from Machining 1 lecture) that cutting force and thrust force are measured during an orthogonal cutting operation: Fc = 1559 N and Ft = 1271 N. The width of the orthogonal cutting operation w = 3.0 mm. Based on these data, determine the shear strength of the work material.

Complete Question

Suppose in the previous example (from Machining 1 lecture) that cutting force and thrust force are measured during an orthogonal cutting operation: Fc = 1559 N and Ft = 1271 N.  The chip thickness before the cut =0.5mm and the width of the orthogonal cutting operation is 3.0mm . Rake angle is equal to 10 and shear plane angle is 25.4. Based on these data, determine the shear strength of the work material.

The shear strength of the work material is  

Explanation:

From the question we are told that the

    The the cutting force is

     The thrust force is

    The width of the octagonal cutting operation is  

     The thickness is

     The shear plane angle is  

The shear strength of the work materiel is mathematically represented as

Where   is the shear force which is mathematically evaluated as

Substituting values we have

While A is the area which is mathematically evaluated as

Substituting values

Substituting this into the equation for shear strength

d.7.5cm is your answer

i believe the answer would be:

d. violin, clarinet, french horn, and tuba