Physics, 05.05.2020 04:18 joshuahagerman1404
You want to manufacture a guitar such that the instrument will be in tune when each of the strings are tightened to the same tension. The middle (D) string on the guitar should have fundamental frequency 146.83 Hz. The highest (E) string should have fundamental frequency 329.63 Hz. If the D string has linear mass density 0.00296kg/m, what should be the mass density of the E string? Assume all the strings are the same length.
Answers: 2
Another question on Physics
Physics, 21.06.2019 19:30
Astone dropped into a well is heard to strike the water after 8seconds. find the depth of the well if the velocity of sound is 350m/s
Answers: 1
Physics, 21.06.2019 23:20
In the sport of parasailing, a person is attached to a rope being pulled by a boat while hanging from a parachute-like sail. a rider is towed at a constant speed by a rope that is at an angle of 15 ∘ from horizontal. the tension in the rope is 1900 n. the force of the sail on the rider is 30∘ from horizontal. what is the weight of the rider? express your answer with the appropriate units.
Answers: 1
Physics, 22.06.2019 03:00
Isla’s change in velocity is 30 m/s, and hazel has the same change in velocity. which best explains why they would have different accelerations? isla had negative acceleration, and hazel had positive. isla had a different time than hazel. isla had positive acceleration, and hazel had negative. isla went a farther distance than hazel.
Answers: 1
Physics, 22.06.2019 08:40
Apulley system is used to lift a 2,000 newton engine up a distance of 3 meters. the operator must apply a force of 250 newtons to the chain of the pulley system to lift the motor. to lift the engine 3 meters, the operator must pull a total of 30 meters of chain through the pulley system. what is the value of di?
Answers: 1
You know the right answer?
You want to manufacture a guitar such that the instrument will be in tune when each of the strings a...
Questions
