Physics, 06.05.2020 21:39 woodsjnjoseph3

A power supply has an open-circuit voltage of 40.0 V and an internal resistance of 2.00 V. It is used to charge two storage batteries connected in series, each having an emf of 6.00 V and internal resistance of 0.300 V. If the charging current is to be 4.00 A, (a) what additional resistance should be added in series? At what rate does the internal energy increase in (b) the supply, (c) in the batteries, and (d) in the added series resistance? (e) At what rate does the chemical energy increase in the batteries?

Answers: 2

Show answers

Answers

Answer from: queenkimm26

Complete Question

A power supply has an open-circuit voltage of 40.0 V and an internal resistance of 2.00 $\Omega$ . It is used to charge two storage batteries connected in series, each having an emf of 6.00 V and internal resistance of 0.300 $\Omega$ . If the charging current is to be 4.00 A, (a) what additional resistance should be added in series? At what rate does the internal energy increase in (b) the supply, (c) in the batteries, and (d) in the added series resistance? (e) At what rate does the chemical energy increase in the batteries?

The additional resistance is $R_z = 4.4 \Omega$

The rate at which internal energy increase at the supply is Z_1 = 32 W

The rate at which internal energy increase in the battery is Z_1 = 32 W

The rate at which internal energy increase in the added series resistance is Z_3 = 70.4 W

the increase rate of the chemically energy in the battery is C = 48 W

Explanation:

From the question we are told that

The open circuit voltage is V = 40.0V

The internal resistance is $R = 2 \Omega$

The emf of each battery is e = 6.00 V

The internal resistance of the battery is r = 0.300V

The charging current is $I = 4.00 \ A$

Let assume the the additional resistance to to added to the circuit is R_z

So this implies that

The total resistance in the circuit is

R_T = R + 2r +R_z

Substituting values

R_T = 2.6 +R_z

And the difference in potential in the circuit is

E = V -2e

=> E = 40 - (2 * 6)

E = 28 V

Now according to ohm's law

$I = \frac{E}{R_T}$

Substituting values

$4 = \frac{28}{R_z + 2.6}$

Making R_z the subject of the formula

So $R_z = \frac{28 - 10.4}{4}$

$R_z = 4.4 \Omega$

The increase rate of internal energy at the supply is mathematically represented as

Z_1 = I^2 R

Substituting values

Z_1 = 4^2 * 2

Z_1 = 32 W

The increase rate of internal energy at the batteries is mathematically represented as

Z_2 = I^2 r

Substituting values

Z_2 = 4^2 * 2 * 0.3

$Z_2 = 9.6 \ W$

The increase rate of internal energy at the added series resistance is mathematically represented as

Z_3 = I^2 R_z

Substituting values

Z_3 = 4^2 * 4.4

Z_3 = 70.4 W

Generally the increase rate of the chemically energy in the battery is mathematically represented as

C = 2 * e * I

Substituting values

C = 2 * 6 * 4

C = 48 W

Answer from: Quest

Neptune is the eighth planet from the sun. it was the first planet to get its existence predicted by mathematical calculations before it was actually seen through a telescope on sept. 23, 1846. irregularities in the orbit of uranus led french astronomer alexis bouvard to suggest that the gravitational pull from another celestial body might be responsible. german astronomer johann galle then relied on subsequent calculations to spot neptune via telescope. previously, astronomer galileo galilei sketched the planet, but he mistook it for a star due to its slow motion. in accordance with all the other planets seen in the sky, this new world was given a name from greek and roman mythology — neptune, the roman god of the sea.

Answer from: Quest

The sample with the lowest specific heat capacity will have the greatest temperature increase. in this case, it would be platinum.

Another question on Physics

Physics, 21.06.2019 20:00

Player kicks a soccer ball from ground level and sends it flying at an angle of 30 degrees at a speed of 26 m/s. what is the horizontal velocity component of the ball to the nearest tenth of a m/s?

Answers: 2

Answer

Physics, 21.06.2019 21:20

Abearing is designed to a reduce friction b. support a load c.guide moving parts such as wheels, shafts and pivots d. all of the above

Answers: 3

Answer

Physics, 22.06.2019 04:30

Ameter stick is pivoted at the 0.50-m line. a 3.0-kg object is hung from the 0.15-m line. where should a 5.0-kg object be hung to achieve equilibrium (the meter stick oriented horizontal and motionless)?

Answers: 1

Answer

Physics, 22.06.2019 07:30

The slope of a velocity time graph over any interval of time gives the during that interval

Answers: 1

Answer

You know the right answer?

A power supply has an open-circuit voltage of 40.0 V and an internal resistance of 2.00 V. It is use...

Questions