What is one way to increase the amplitude of a wave in a medium?

A. by applying a vibration at the natural frequency of the medium

B. by increasing the velocity of the wave source

C. by moving the source of the wave away from the receptor, or observer

D. by decreasing the frequency of the wave source

Ben(55 kg) is standing on very slippery ice when junior(25kg) bumps into him. junior was moving at a speed of 8m/s before the collision and ben and junior embrace after the collision. find the speed of ben and junior as they move across the ice after the collision .

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

When the magnetic domains in a material can be aligned, but eventually drift out of alignment, the material is