Physics, 19.06.2020 20:57 lovepink6524
A cube of side 8cm made of wood floats in water with one Fourth of its volume outside the water. What is the density of the solid.
Answers: 3
Physics, 23.06.2019 08:30
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
Physics, 23.06.2019 11:00
What is reflection, what is refraction, and what is diffraction. what some similarities or differences between the three.
Answers: 2
Physics, 23.06.2019 23:00
The electric field strength just above one face of a copper penny is 2300 n/c. what is the surface charge density on this face of the penny
Answers: 3
Physics, 23.06.2019 23:50
A400-lb object is released from rest 500-ft above the ground and falls under the influence of gravity. assume the force in pounds due to air resistance is where is the velocity of the object in ft/sec, determine the equation of motion of the object. when will the object hit the ground and what is its velocity at the impact
Answers: 2
A cube of side 8cm made of wood floats in water with one Fourth of its volume outside the water. Wha...
English, 22.09.2020 20:01
Computers and Technology, 22.09.2020 20:01
Chemistry, 22.09.2020 20:01
Mathematics, 22.09.2020 20:01
Mathematics, 22.09.2020 20:01
Computers and Technology, 22.09.2020 20:01
Mathematics, 22.09.2020 20:01
History, 22.09.2020 20:01